Loctite 648, Maximum Strength 180 C
|
|
- Item #: m-2003
| Loctite 648, Maximum Strength 180ºC Fast Curing - 10 gram
|
| Uses: |
| Gluing flex cables into couplers. Retains flex cables, gears and sprockets onto gearbox shafts and rotors in electric motors etc. |
| High strength/high temperature formula. Recommended for continuous working temperatures up to 175°C. Fills gaps of up to 0.2mm (0.008") radial clearance. Fixtures in 5 minutes.
Directions for use For best performance surfaces should be clean and free of grease. With flex cables, use brake cleaner to thoroughly clean all surfaces. Not removing all oil and grease is the most common cause for joint failure. Ensure joint is completely filled with adhesive. For slip-fitted assemblies this is achieved by applying adhesive around the pin and the leading edge of the collar and using a rotating motion during assembly to ensure good coverage. For press fitted assemblies adhesive should be applied thoroughly to both bond surfaces and assembled at high press on rates. For shrink fitted assemblies the adhesive should be coated onto the pin, the collar should then be heated to create sufficient clearance for free assembly. Parts should not be disturbed until sufficient handling strength is achieved. |
